What is the Correct Way to Use the Vacuum Pump of the Vacuum Packaging Machine?

The vacuum packaging machine is an indispensable packaging machine on our production line. In particular, most of the products on the market today are vacuum-packed. It can be seen how much demand for vacuum packaging machines is, but many friends do not know about vacuum packaging machines. It is the installation and use of the vacuum pump in the vacuum packaging machine, so how to install and use the vacuum pump of the vacuum packaging machine? Let me give you a detailed introduction.

Double Chamber Vacuum Packing Machine

1. There are two ways to install the vacuum pump of the vacuum packaging machine, one is the built-in type. The other is an external type, usually a 2X-15 two-stage rotary vane vacuum pump. This pump has a faster pumping rate and a higher vacuum than a single-stage pump. It is generally suitable for large production batches and higher vacuum requirements. Install outdoors to reduce exhaust pollution

2. The vacuum gauge is usually axially forward and installed on the operation panel or on the front of the fuselage. It is usually ￠60 gauge with an accuracy of 2.5; ￠100 gauge with an accuracy of 1.5.

3. Two vacuum solenoid valves are usually used, one is ￠5 two-position three-way solenoid valve, which is mainly used to control the upper and lower displacement of the hot-pressing sealing device. The other is ￠15 two-position two-way

The solenoid valve is mainly used to open the passage after the completion of vacuum and heat sealing, so that the atmosphere will return to the vacuum chamber, otherwise the vacuum chamber cannot be opened.

The above is the installation and use of the vacuum pump of the vacuum packaging machine. I hope everyone can operate and use it correctly in the process of using the vacuum packaging machine in the future.

Our company has Double Chamber Vacuum Packing Machine on sale, welcome to contact us.